Read This Gehl 253, 303, 353, 373 Compact Excavators Operator’s Manual carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage.
The operating instructions are to be read and used carefully by all persons who carry out work with or on the machine before putting the machine into service for the first time and later, at regular intervals. The operating instructions allow the machine operator to familiarize himself with the machine more easily and prevent malfunctions occurring due to improper operation.
– increases reliability in use.
– extends the service life of your machine.
– reduces repair costs and downtime.
These operating and maintenance instructions contain all the information required for operating and maintaining your machine.
Models Covered:
Gehl 253, 303, 353, 373 Compact Excavators
Manual Contents:
Chapter 1 – General Information
Introduction
Ownership Change
Excavator Component Identification
Specifications
Fluid Capacities/Lubricants
Model 253 Specifications
Engine
Hydraulic System
Undercarriage and Swing System
Dozer Blade
Bucket (Standard)
Noise Levels
General Specifications
Model 303 Specifications
Engine
Hydraulic System
Undercarriage and Swing System
Dozer Blade
Bucket (Standard)
Noise Levels
General Specifications
Fuse Panel
Model 353 Specifications
Engine
Hydraulic System
Undercarriage and Swing System.
Dozer Blade
Bucket (Standard)
Noise Levels
General Specifications
Model 373 Specifications
Engine
Hydraulic System
Undercarriage and Swing System.
Dozer Blade
Bucket (Standard)
Noise Levels
General Specifications
Load Diagrams
Checklists
Chapter 2 – Safety
General Safety Information
Unauthorized Modifications
Attachment Precautions
Mandatory Safety Shutdown Procedure
Operational Safety
Exposure to Crystalline Silica
Parking the Machine
Travel Controls May Produce Reversed Travel Operations
Additional Travel Precautions
Snow, Ice and Cold Temperature Operation Precautions
Fire Hazards
Fire Extinguisher Recommendation
Additional Safety Equipment
Maintenance Safety
Safety Decals
Hydraulic Cylinder Seal Periodic Replacement
High Pressure Hydraulic Lines Store Energy
Operator’s Cab and Swing Frame Deck Maintenance
Battery Electrolyte and Explosive Gas Hazard
Battery Disconnection Precaution
Jump-starting or Charging the Battery
Lifting the Machine with a Crane
Transporting
Safety Decals
New Decal Application
ISO-Style Safety Decal Locations (Later Machines)
ISO-Style Information Decal Locations (All Machines)
ANSI-Style Safety Decal Locations (Early Machines)
Chapter 3 – Operation
Operating Controls
Machine Orientation
Ignition Key Switch
Engine Speed Control
Travel Controls
SAE-Pattern Operating Controls
ISO-Pattern Operating Controls
Boom Swivel
Optional Joystick Buttons
Operator’s Seat Adjustments
Seat Belt
Ventilation
Machine Operation
Engine Shut Down
Travel
Water Operation
Operating Instructions
Slope Operation
Cold Weather Operation
Swiveling the Boom
Grading
Mounting/Removing Buckets
Auxiliary Hydraulics Connections
Excavating
Proper Digging Techniques
Transporting
Towing
Lifting the Machine
Loading and Transporting
Chapter 4 – Maintenance
General Information
Care and Servicing
Maintenance Safety
Maintenance Schedule
Check, Clean and Inspect
Fluid and Filter Changes
Swing Gear Ring
Cab Heating System
Bucket, Boom and Dozer Blade
Lubrication
Recommended Lubricants
Engine Oil
Hydraulic Oil
Swing Ring
Final Drive Unit
All Lubrication Points – See Figure 4-1
Engine
Checking Engine Oil Level
Changing Engine Oil and Filter
Air Cleaner Service
Fuel System
Filling the Fuel Tank
Fuel Filter
Water Separator
Purging Air from the Fuel System
Coolant System
Checking Coolant Level
Checking and Adjusting V-belt Tension
Electrical System
Fuses
Battery
Hydraulic System
Checking Hydraulic Oil Level
Changing Hydraulic Oil
Hydraulic Hose Maintenance
Track System
Track Cleaning
Changing Final Drive Oil
Checking and Adjusting Track Tension
Windshield Washer Fluid
Cab/Canopy Removal/Replacement
Long-Term Storage
Before Storage
During Storage
After Storage
Chapter 5 – Troubleshooting
Engine
Indicator Lamps
Seals and Hoses
Traveling Gear
Bucket, Boom and Dozer Blade
And More………
============================
File Format: PDF
Compatible: All Versions of Windows & Mac ,Android
Language: English
Total Pages: 116
This manual is INSTANT DOWNLOAD. You can save time and money by purchasing this manual, which you can browse on your electronic products, or print out for reference.
We not only provide quality manuals, but we will also Provide excellent after-sales service, Customer Satisfaction Guaranteed! we offer free replenishment of any manual that we sold to you. If you lost or not found your manual, And any questions, please contact me.
support email: manualservicerepair@outlook.com
Thank you for coming and reading.