Read This Gehl CT5-16, CT5-16 Turbo Telescopic Handlers Operator’s Manual carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage.

The operating instructions are to be read and used carefully by all persons who carry out work with or on the machine before putting the machine into service for the first time and later, at regular intervals. The operating instructions allow the machine operator to familiarize himself with the machine more easily and prevent malfunctions occurring due to improper operation.

– increases reliability in use.
– extends the service life of your machine.
– reduces repair costs and downtime.

 

These operating and maintenance instructions contain all the information required for operating and maintaining your machine.

 

Models Covered:

Gehl CT5-16, CT5-16 Turbo Telescopic Handlers

 

Manual Contents:

Introduction
1 SPECIFICATIONS
Identification of the Telescopic Handler
Specifications
Dimension and Load Chart
2 CHECKLISTS
3 SAFETY
Additional Safety Reminders
Before Operation Safety Reminders
Operation Safety Reminders
Servicing Safety Reminders
Modification, Nameplates, Markings and Capacities
Safety Guards and Warning Devices
Safety Decal Locations
4 OPERATING AND SAFETY INSTRUCTIONS
A – Before Starting the Telescopic Handler
B – Operator Instructions
C – Enviroment
D – Visibility
E – Starting the Telescopic Handler
F – Operating the Telescopic Handler
G – Stopping the Telescopic Handler
H – Driving the Telescopic Handler on a Public Highway
I – Driving the Telescopic Handler with a Front-Mounted Attachment
J – Operating the Telescopic Handler with a Trailer Instructions for Handling a Load
K – Choice of Attachments
L – Mass and Center-of-Gravity of Load
M – Transverse Attitude of the Telescopic Handler
N – Picking Up a Load on the Ground
O – Picking Up a High Load
P – Setting Down a High Load
Q – Suspended Loads – Guidelines for “FREE RIGGING/SUSPENDED LOADS”
5 INSTRUMENTS AND CONTROLS
Description
1 – Operator’s Seat
2 – Seat Belt
3 – Control and Signal Lamp Panel
4 – Boom Mounted Work Lights (Option)
5 – Switch Panel
6 – Light Switch, Horn and Indicator Switch
7 – Ignition Switch
8 – Brake Fluid Reservoir and Windshield Washer Access Panel
9 – Brake Fluid Reservoir
10 – Windshield Washer Reservoir
11 – Fuse and Relay Access Panel
12 – Fuses and Relays
13 – Cab Interior Light
14 – Accelerator Pedal
15 – Service Brake Pedal and Transmission Cut-off
16 – Forward/Reverse Lever
17 – Parking Brake Lever
18 – Steering Mode Selection
19 – Hydraulic Controls
20 – Load Charts
21 – Heater Controls (CT5-16 Turbo)
21 – Heater and Air Conditioner Controls (CT5-16 Turbo)
22 – Cab Air Filters (CT5-16 Turbo)
23 – Windshield Defroster (CT5-16 Turbo)
24 – Heater Vents (CT5-16 Turbo)
25 – Door Lock (CT5-16 Turbo)
26 – Locking Handle for Upper Half Door (CT5-16 Turbo)
27 – Releasing Button for Upper Half Door (CT5-16 Turbo)
28 – Handle for Rear Window Opening
29 – Manual Holder
30 – Front Lights
31 – Rear Lights
32 – Backup Alarm
33 – Inclinometer
34 – Engine Block Heater
35 – Radio
Tow Pin
A – Tow Pin
B – Trailer Electric Connector
6 MAINTENANCE
Gehl Original-Equipment Service Parts
Filter Cartridges and Belts
Lubricants and Fuel
Maintenance Instructions
General Instructions
Maintenance
Lubricant and Fuel Levels
Hydraulic Systems
Electrical Systems
Welding
Washing the Telescopic Handler
Storage Instructions
Preparing the Telescopic Handler
Protecting the Engine
Protecting the Telescopic Handler
Returning the Telescopic Handler into Service
Towing the Telescopic Handler
Lifting the Telescopic Handler
Loading the Telescopic Handler on a Trailer
Loading the Telescopic Handler
Tying Down the Telescopic Handler
Service Schedule
A – Daily or Every 10 Hours of Service
B – Every 50 Hours of Service
C – Every 250 Hours of Service
D – Every 500 Hours of Service
E – Every 1000 Hours of Service
F – Every 2000 Hours of Service
G – Periodic Maintenance
H – Every Two Years
7 DECALS
General Information
New Decal Application
Decal Locations
8 ATTACHMENTS
Introduction
Installing Attachments
A – Attachment w/o Hydraulics and Manual Locking Device
B – Hydraulic Attachment and Manual Locking Device
C – Attachment w/o Hydraulics and with Hydraulic Locking Device (Option)
D – Hydraulic Attachment and Hydraulic Locking Device (Option)
E – Attachment w/o Hydraulics and w/ Hydraulic Device (Tri-Function Joystick)
F – Hydraulic Attachment and Hydraulic Locking Device (Tri-Function Joystick)
G – Hydraulic Attachment and Manual Locking Device (Tri-Function Joystick)
Technical Specifications of Attachments
Load Zone Charts
Torque Specifications
Index
Warranty

And More………

 

============================
File Format: PDF
Compatible: All Versions of Windows & Mac ,Android
Language: English
Total Pages: 98

This manual is INSTANT DOWNLOAD. You can save time and money by purchasing this manual, which you can browse on your electronic products, or print out for reference.

We not only provide quality manuals, but we will also Provide excellent after-sales service, Customer Satisfaction Guaranteed! we offer free replenishment of any manual that we sold to you. If you lost or not found your manual, And any questions, please contact me.

support email: manualservicerepair@outlook.com

Thank you for coming and reading.