Read This Gehl CT7-23 Turbo Telescopic Handler Operator’s Manual carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage.

The operating instructions are to be read and used carefully by all persons who carry out work with or on the machine before putting the machine into service for the first time and later, at regular intervals. The operating instructions allow the machine operator to familiarize himself with the machine more easily and prevent malfunctions occurring due to improper operation.

– increases reliability in use.
– extends the service life of your machine.
– reduces repair costs and downtime.

 

These operating and maintenance instructions contain all the information required for operating and maintaining your machine.

 

Models Covered:

Gehl CT7-23 Turbo Telescopic Handler

 

Manual Contents:

Introduction
Table of Contents
1 SPECIFICATIONS
Identification of the Telescopic Handler
Specifications
Dimension and Load Chart
2 CHECKLISTS
3 SAFETY
Additional Safety Reminders
Before Operation Safety Reminders
Operation Safety Reminders
Servicing Safety Reminders
Modification, Nameplates, Markings and Capacities
Safety Guards and Warning Devices
Safety Decal Locations
4 OPERATING AND SAFETY INSTRUCTIONS
A – Before Starting the Telescopic Handler
B – Operator’s Instructions
C – Environment
D – Visibility
E – Starting the Telescopic Handler
F – Operating the Telescopic Handler
G – Stopping the Telescopic Handler
H – Driving the Telescopic Handler on a Public Highway
I – Driving the Telescopic Handler with a Front-Mounted Attachment
J – Operating the Telescopic Handler with a Trailer
Instructions for Handling a Load
K – Choice of Attachments
L – Mass and Center-Of-Gravity of Load
M – Transverse Attitude of the Telescopic Handler
N – Picking Up a Load on the Ground
O – Picking Up a High Load
P – Setting Down a High Load
Q – Suspended Loads
Guidelines for “FREE RIGGING/SUSPENDED LOADS”
5 INSTRUMENTS AND CONTROLS
Description
1 – Operator’s Seat
2 – Safety Belt
3 – Control and Signal Lamp Panel
4 – Boom Mounted Work Lights, Option
5 – Switch Panel
6 – Light Switch, Horn and Indicator Switch
7 – Ignition Switch
8 – Brake Fluid Reservoir and Windshield Washer Access Panel
9 – Brake Fluid Reservoir
10 – Windshield Washer Reservoir
11 – Fuse and Relay Access Panel
12 – Fuses and Relays
13 – Cab Interior Light
14 – Accelerator Pedal
15 – Service Brake Pedal and Transmission Cut-off
16 – Shift Lever and Transmission Cut-off
17 – Forward/Reverse Lever
18 – Parking Brake Lever
19 – Steering Mode Selection
20 – Hydraulic Controls and Transmission Cut-Off
21 – Load Charts
22 – Heater / Air Conditioning Controls
23 – Cab Air Filters
24 – Windshield Defroster
25 – Heater Vents
26 – Door Lock
27 – Locking Handle for Upper Half Door
28 – Releasing Button for Upper Half Door
29 – Handle for Rear Window Opening
30 – Manual Holder
31 – Front Lights
32 – Rear Lights
33 – Engine Block Heater
34 – Inclinometer
35 – Steering Wheel Positioning Handle
36 – Radio
37 – Cigar Lighter and 12-VDC Accessary Outlet
38 – Attachment Hydraulic Control for Continuos Operation
39 – Hydraulic Attachment Locking
Tow Pin
A – Tow Pin
B – Trailer Electric Connector
Use of Options
1 – Boom Ride Control
2 – Reversible Fan
3 – Second Auxiliary Hydraulic Circuit with Hydraulic Attachment Locking
6 MAINTENANCE .
Gehl Original Equipment Service Parts
Filter Cartridges and Belts
Lubricants and Fuel
Maintenance Instructions
General Instructions
Maintenance
Lubricant and Fuel Levels
Hydraulic Systems
Electrical Systems
Welding
Washing the Telescopic Handler
Storage Instructions
Preparing the Telescopic Handler
Protecting the Engine
Protecting the Telescopic Handler
Returning the Telescopic Handler into Service
Towing the Telescopic Handler
Towing
Lifting the Telescopic Handler
Loading the Telescopic Handler on a Trailer
Loading the Telescopic Handler
Tying Down the Telescopic Handler
Service Schedule
A – Daily or Every 10 Hours of Service
B – Every 50 Hours of Service
C – Every 250 Hours of Service
D – Every 500 Hours of Service
E – Every 1000 Hours of Service
F – Every 2000 Hours of Service
G – Periodic Maintenance
H – Every Two Years
7 DECALS
General Information
New Decal Application
Decal Locations
8 ATTACHMENTS
Introduction
Installing Attachments
A – Attachment without Hydraulics and Hydraulic Locking Device
B – Hydraulic Attachment and Hydraulic Locking Device
Technical Specifications of Attachments
Load Zone Charts
Torque Specifications
Index
Warranty

And More………

 

============================
File Format: PDF
Compatible: All Versions of Windows & Mac ,Android
Language: English
Total Pages: 96

This manual is INSTANT DOWNLOAD. You can save time and money by purchasing this manual, which you can browse on your electronic products, or print out for reference.

We not only provide quality manuals, but we will also Provide excellent after-sales service, Customer Satisfaction Guaranteed! we offer free replenishment of any manual that we sold to you. If you lost or not found your manual, And any questions, please contact me.

support email: manualservicerepair@outlook.com

Thank you for coming and reading.