Read This Gehl Z17 Compact Excavator Operator’s Manual carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage.

The operating instructions are to be read and used carefully by all persons who carry out work with or on the machine before putting the machine into service for the first time and later, at regular intervals. The operating instructions allow the machine operator to familiarize himself with the machine more easily and prevent malfunctions occurring due to improper operation.

– increases reliability in use.
– extends the service life of your machine.
– reduces repair costs and downtime.

 

These operating and maintenance instructions contain all the information required for operating and maintaining your machine.

 

Models Covered:

Gehl Z17 Compact Excavator

 

Manual Contents:

1. Introduction
2. Safety Information
3. Product Overview
3-1. Intended uses
3-2. Break in period
3-3. Conditions to insure compliance with EPA emission standards
4. Operation License
5. Ordering Replacement Parts and Service Calls
5-1. Location of machine serial number plate
5-2. Location of engine serial number plate
5-3. Location of EPA emission control plates
5-4. Ordering replacement parts and service calls
6. Contents
SAFETY
7. Basic Precautions
8. Operating Precautions
8-1. Precautions before starting the engine
8-2. Precautions for starting the engine, working and parking
8-3. Precautions for transportation
8-4. Precautions for the battery
8-5. Precautions for towing
8-6. Precautions for hooked bucket
9. Precautions for Servicing
9-1. Precautions before servicing
9-2. Precautions during servicing
10. Safety Messages (Warning Labels)
10-1. Location of warning labels
OPERATION
11. Identification of Important Parts
11-1. Overview of the machine
11-2. Controls and switches
12. Description of Control Devices
12-1. Monitor
12-2. Switches
12-3. Control levers and pedals
12-4. Engine hood.
12-5. Storage space for the operation & maintenance manual
12-6. Operator’s seat
12-7. Fuse.
13. Operating Instructions
13-1. Checking before starting the engine
13-2. Starting up the engine
13-3. Operating and checking instructions after starting the engine
13-4. Traveling
13-5. Steering
13-6. Stopping the machine
13-7. Swinging the upper structure
13-8. Operating the implement
13-9. Operating the track gauge change
13-10. Precautions for operating the implement
13-11. Precautions for working
13-12. Precautions for going up and down a slope
13-13. Escaping from the mud
13-14. Operations using the bucket
13-15. Replacing the bucket
13-16. Reversing the bucket
13-17. Parking the machine
13-18. Inspection requirements after completing operation
13-19. Stopping the engine.
13-20. Inspection requirements after stopping the engine
13-21. Locking..
13-22. Handling the rubber crawlers
13-23. Handling hydraulic P.T.O
14. Transportation
14-1. Loading and unloading the machine
14-2. Precautions for loading the machine
14-3. Precautions for transporting the machine
14-4. Suspending the machine
15. Care and Service in Cold Weather
15-1. Preparing for cold weather
15-2. Precautions after a day’s work
15-3. After cold weather ends
16. Long-term Storage
16-1. Before storing
16-2. Storing
16-3. Using the machine again
17. Troubleshooting
17-1. Phenomena that do not constitute faults
17-2. Towing
17-3. If the battery is overdischarged
17-4. Troubleshooting
MAINTENANCE
18. Precautions for Servicing
19. Basic Servicing Practices
19-1. Oils, fuel, and cooling water
19-2. Electrical equipment
19-3. Hydraulic system
20. Consumables
21. Fueling, Oiling and Greasing Based on Temperature Range
21-1. Fuel and oil
21-2. Cooling water
22. Standard Tightening Torque for Bolts and Nuts
22-1. Required tools
22-2. Torque table
23. Replacing Essential Parts Periodically
24. Maintenance Table
24-1. Table of service time intervals
24-2. Service intervals when using the hydraulic breaker
25. Procedures for Maintenance
25-1. First services
25-2. Non-periodic services
25-3. Checking before start-up
25-4. Maintenance every 50 service hours
25-5. Maintenance every 100 service hours
25-6. Maintenance every 200 service hours
25-7. Maintenance every 250 service hours
25-8. Maintenance every 400 service hours
25-9. Maintenance every 500 service hours
25-10. Maintenance every 1000 service hours
25-11. Maintenance every 2000 service hours
SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
26. Specifications and Dimensional Diagrams
OPTIONAL PARTS AND ATTACHMENTS
27. General Precautions
27-1. Safety precautions
27-2. Precautions for mounting an attachment (implement)
28. Optional Parts and Attachments
28-1. Optional parts and attachmentse
NOTES
29. Maintenance Log

And More………

 

============================
File Format: PDF
Compatible: All Versions of Windows & Mac ,Android
Language: English
Total Pages: 210

This manual is INSTANT DOWNLOAD. You can save time and money by purchasing this manual, which you can browse on your electronic products, or print out for reference.

We not only provide quality manuals, but we will also Provide excellent after-sales service, Customer Satisfaction Guaranteed! we offer free replenishment of any manual that we sold to you. If you lost or not found your manual, And any questions, please contact me.

support email: manualservicerepair@outlook.com

Thank you for coming and reading.